|
|
KyMBA Community
| Author |
Messages |
|
gb77
Granny Gear
Posts:22
Registered Users
 |
| 06/22/2008 7:19 PM |
|
| I just finished building a 2005 KHS XC604. I cant get the shifting to work right in gears 4,5, and 6 on the rear cog. One time shifting is great the next time it will ghost shifts or not at all. My derailers, crank, and chain are new so nothing is bent or wore out. I added length to cable housing to the rear derailer and that didn't help. To me the alignment looks good. Any suggestions??? This is my first full suspension. Hardtails are a piece of cake to set up. |
|
|
|
|
russell g
Big Ring
Posts:303
Registered Users
Louisville, KY
|
| 06/22/2008 10:23 PM |
|
| check for kinks in the cable or the housing. a slight bend in the cable can cause your problem. |
|
|
|
|
RIC0
Big Ring
Posts:266
Registered Users
sumwaresin, KY
|
| 06/25/2008 1:02 PM |
|
| I had something like this happen on my 604 and it took some fine tuning of the barrel adj to fix it. I had all new cables, cassette, chain, XTR der and it pissed me off for a week or two and it was the barrel adj. all along. |
|
|
|
|
|
| You are not authorized to post a reply. |
|
|
|
ActiveForums 3.7
|
|